Frigidaire Gas Oven Range Igniter 316489403 for Electrolux

Description

SPECS:

This igniter’s amperage range is 3.3 – 3.6. Used with 3.2 to 3.5 amp rated gas safety valves. Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor; ignitors are fragile and will break easily.

DESCRIPTION:

The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube.

Fits the following models (not all applicable models may be listed):

BGGF3031KBA BGGF3031KBB BGGF3031KBC BGGF3031KBD BGGF3031KBE BGGF3031KBF BGGF3031KBG BGGF3031KBH BGGF3031KWA BGGF3031KWB BGGF3031KWC BGGF3031KWD BGGF3031KWE BGGF3031KWF BGGF3031KWG BGGF3031KWH BGGF3041KFA BGGF3041KFB BGGF3041KFC BGGF3041KFD BGGF3041KFE

79071342704 79071342705 79071342706 79071343706 79071343707 79071343708 79071343709 79071349704 79071349705 79071349706 79071362705 79071362706 79071362707 79071363708 79071363709 7907136370A&